BACK


HOME >> PRODUCTS >>

PU-51N
Contacting Vibrometer

Contacting Vibrometer PU-51N


PU-51N Click the image to see details.

OutlinesOur contacting vibrometer(PU-51N) can measure the vibration of the bearing base by being set in the bearing base and the casing of turning machines all the time, and the monitor which is set in the instrumental room can control and record the abnormal value.
Features ・Easy to be set in the bearing base because it is conecting type
・Can be used in danger area such as petrochemical plants (The pressure-resistant and explosion-protected structure)
Purpose General Vibrometer It is the general type, which can measure from 10 to 250Hz. It can measure general turning machines.
Specs The sort of Explosion-protected StructureThe pressure-resistant and explosion-protected open-air water-resistant structure
GradeUBT4
Attested NumberNo.C15647
Measurable Amplitude0〜1000μm
Measurable Frequency10〜250Hz
Tolerant Acceleration100m/sec2
Output Impedance100Ω
CableShield pair cable
CVVS-2mm2, max 1km
Surrounding Temperature-20℃〜80℃
WeightApprox. 2.3s
SizeH×W×D: 107×150×120mm (The Fixing Hole Interval: 130mm)
MaterialAL
Screws to connect Electric Wire PipeThe pressure-resistant packing appliance
Diameter of the cable which suit protective tube G 3/4: φ10〜12
OrderPU-51N
BACK


HIROSHIMA VIBRATION INDUSTRIES Co., Ltd.