 |
Click the image to see details. |
| Outlines | Our contacting vibrometer(PVi-5) can measure the vibration of the bearing base by being set in the bearing base and the casing of turning machine all the time, and the monitor which is set in the instrumental room can control and record the abnormal value. | ||
| Features |
・It is easy to be set in the bearing base because it is conecting type. ・It can be used in danger area such as petrochemical plants. (The essentially safe explosion-protected open-air structure) ・It can reply to 1.6Hz(96r.p.m), the low frequency. | ||
| Purposes | Low Frequency Vibrometer | It is the wide range type, which can measure from 1.6Hz(96r.p.m) at the minimum to 1000Hz at the maximum. It can measure the vibration of mil, blower and compressor. | General Vibrometer | It is the general type, which can measure from 10 to 1000Hz(ISO2954). It can measure general turning machines. |
| Specs | ■Pick-up (PU-5) [ It is set up at danger area. ] | ||
| The sort of Explosion-protected Structure | The essentially safe explosion-protected open-air water-resistant structure | ||
| Grade | 3nG5 | ||
| Measurable Amplitude | 0～1000μm | ||
| Measurable Frequency | 1.6～1000Hz(Low Frequency Vibrometer) 10～1000Hz(ISO2954) | ||
| Tolerant Acceleration | 5G | ||
| Output Impedance | 100Ω | ||
| Cable | Shield pair cable CEES1.25mm2, max 1km | ||
| Surrounding Temperature | -10℃～70℃ | ||
| Weight | Approx. 1㎏ | ||
| Order | PU-5 | ||
| ■Barrier (ZB-4) [ It is set up at undanger area. ] | |||
| The sort of Explosion-protected Structure | the essentially safe explosion-protected structure | ||
| Grade | 3nG5 | ||
| Attested Number | No.26988 | ||
| Rating | 250V AC, 5A | ||
| Surrounding Temperature | 0℃～40℃ | ||
| Weight | Approx. 300g | ||
| Order | ZB-4 | ||