 |
Click the image to see details. |
| Outlines | Our uncontacting vibrometer(SVi-4) can measure the vibration of axis and bearing of turning machine by the eddy current type uncontacting detector all the time, and the monitor which is set in the instrumental room can control and record the abnormal value. | |||
| Features |
・It neither make effects on the measuring target, nor get effects of lubricating oil because of the uncontacting style. ・It can be used in danger area such as petrochemical plants. (The essentially safe explosion-protected open-air structure) | |||
| Purposes | Vibrometer | Fix the detector at a right angle to the axis, and you can measure the relative vibration of the axis and bearing, that is axis vibration. | Displacement Meter | Fix the detector in the parallel direction to the axis to measure the axis position, and you can check if the thrust shoe would be worn away. | Other Applied Samples | ・Turning meter ・Position marker of turning machine ・Measure of the oil film ・Measure of the axis deviation of turning machine ・Measure of its own vibration of lightweight article |
| Specs | ■General Spec | |||
| The sort of Explosion-protected Structure | The essentially safe explosion-protected open-air water-resistant structure | |||
| Grade | 3nG5 | |||
| Attested Number | No.26988 | |||
| Cable | CEES1.25mm2, max 1km | |||
| This system is composed of a probe which detect vibration and displacement and its driver. These are set up at the measuring spot. Vibration/displacement signal is output from the Driver and is connected to the barrier in the instrumental room by the extensible cable(max. 1km). Monitors, recorders and such are connected beyond the barrier and observe the vibration/displacement all the time. | ||||
| ■Probe (SV-2P) [ It is set up at danger area. ] | ||||
| Surrounding Temperature | -30℃～120℃ | |||
| Analysis Ability | 1μm | |||
| Measurable Range | 0～1000μm or 0～2000μm | |||
| Order | See table(1)□ | |||
| ■Driver (SV-2D) [ It is set up at danger area. ] | ||||
| Scale Factor | 0.5p-p/100μm | |||
| Power Supply | 16V, 10mA | |||
| Output Impedance | 300Ω | |||
| Measurable Frequency | DC～1.5KHｚ | |||
| Surrounding Temperature | -10℃～60℃ | |||
| Weight | Approx. 1.2kg（including case） | |||
| Order | See table(2)□ | |||
| ■Barrier (ZB-4) [ It is set up at undanger area. ] | ||||
| The sort of Explosion-protected Structure | the essentially safe explosion-protected structure | |||
| Grade | 3nG5 | |||
| Attested Number | No.26990 | |||
| Rating | 250V AC, 5A | |||
| Surrounding Temperature | 0℃～40℃ | |||
| Weight | Approx. 300g | |||
| Order | ZB-4 | |||
| ① | ② | ③ | ④ | ⑤ | ⑥ | ||||||
| Code | Measurable Range | Code | Diameter and Pitch of The Screw | Code | The Dimentions of ③ | Code | The Dimentions of ④ | Code | The Dimentions of ⑤ | Code | Connector to The Driver |
| 48 | 0～1000 μm | 06 | M6, P:1.0mm | 35 | 35mm | 00 | without the connector | 02 | 2000mm | ／ | BNC connector |
| 78 | 0～2000 μm | 10 | M10, P:1.5mm | 50 | 50mm | 05 | 500mm | 03 | 3000mm | 01 | connection connector |
| 14 | 1/4-28UNF | 10 | 1000mm | 05 | 5000mm | ||||||
| 38 | 3/8-24UNF | ||||||||||
| ① | ② | ||
| Code | Measuring Object | Code | Input Connector |
| ／ | Vibration | ／ | BNC connector |
| P | displacement | B | connection connector |